亞信電子提醒您  
親愛的客戶您好:

假如在使用亞信USB轉乙太網路產品有不正常現象,請下載 " How to identify authentic ASIX USB to LAN Products " 文件,先自行確認一下是否正在使用非真正亞信USB轉乙太網路晶片的產品. 如果您買到非真正亞信USB轉乙太網路晶片的產品,請找該產品製造商或經銷商要求相關驅動程式與技術支持.

  我瞭解   
 
content
 
ZT485E - 低功耗5V 10Mbps RS-485收發器 | 亞信電子
Asix
  
>>English
>>简体中文
最佳瀏覽效果: 建議使用 IE 8.0以上Mozilla FirefoxGoogle Chrome ,螢幕解析度設為1024x768
 
您是訪客
| 登錄 |
 
嵌入式乙太網路控制器
 Non-PCI 超高速乙太網路
 Non-PCI 高速乙太網路
 MII/RMII 高速乙太網路
超高速USB乙太網路控制器
 USB 3.0 超高速乙太網路
 USB 2.0 超高速乙太網路
 USB 2.0 高速乙太網路
嵌入式網路/USB單晶片
 嵌入式Wi-Fi單晶片
 嵌入式乙太網路單晶片
 USB KVM切換器單晶片
I/O 連接控制器
 PCIe 橋接器
 PCI 橋接器
 USB 橋接器
 RS-232/RS-485收發器
      5V RS232 收發器
      3V RS232 收發器
      5V RS485 收發器
      3V RS485 收發器
 EL驅動器
嵌入式無線模組
 嵌入式Wi-Fi模組
 嵌入式藍牙模組
首頁 >> 產品訊息 >> I/O 連接控制器 >> RS-232/RS-485收發器 >> 5V RS485 收發器 >> ZT485E

 ZT485E -- 低功耗5V 10Mbps RS485收發器 (具備8接腳, 半雙工)

The ZT485E series devices are 5V differential data line transceivers for RS485/RS422 communication that consist of one driver and one receiver with high level of ESD protection. They are designed for balanced transmission lines interface that meet ANSI standard TIA/EIA-485-A and ISO 8482:1987(E) specifications.

The ZT485E series devices span out with half or full duplex, data rate guaranteed at 250K bit per second or 10Mbps, and allow one unit load that fan out 32 devices sharing a common bus. The I/Os are enhanced-electrostatic discharge (ESD) protected, exceeding ±15kV Human Body Model (HBM).

規格:

  • Meets or exceeds the requirements of ANSI Standard TIA/EIA-485-A and ISO 8482:1987(E) specifications for Vcc at +5V ±10%
  • Low quiescent current - 0.5mA typ., 1mA max
  • Low shutdown current (where applicable) - 1μA typical, 10μA max
  • Guaranteed standard data rate 250Kbps or 10Mbps
  • True Fail-Safe (Open and Short) Receiver
  • -7V to +12V common-mode input voltage range
  • Half-Duplex or Full-Duplex configuration
  • Allows up to 1 unit load (32 devices) on the same common bus
  • Controlled driver output slew rate and receiver input filtering
  • Active-high driver enable and active-low receiver enable
  • ESD Protection on bus terminals
    • ±15kV Human Body Model (HBM)
  • Drop-in Replacements for MAX483E, MAX485E, MAX488E, MAX489E, MAX490E, MAX491E
  • High fanout driving 1/8 unit load (256 devices) available on the ZT485H Series

應用目標:
  • RS-422/RS-485 communications
  • Utility meters
  • Industrial process control
  • Building automation
  • Level translators
  • Transceivers for EMI-sensitive applications
  • Routers and HUBs
  • Industrial-controlled Local Area Networks
  • Industrial PCs, embedded PCs and peripherals

 接腳配置與應用示意圖

ZT485E_Pin_Configuration.jpg

 選型指南

IO_5V_RS485_Selection_Guide.jpg

技術文件

 產品簡介,產品介紹和數據表

ZT485E 產品簡介134.4 KB2015-04-30
Download
ZT485E 數據表 2 MBV2.202017-09-05
Login MyASIX

[使用條款]    [網站地圖]
Copyright © 2013-2017 ASIX Electronics Corporation All Rights Reserved.