亞信電子提醒您  
親愛的客戶您好:

假如在使用亞信USB轉乙太網路產品有不正常現象,請下載 " How to identify authentic ASIX USB to LAN Products " 文件,先自行確認一下是否正在使用非真正亞信USB轉乙太網路晶片的產品. 如果您買到非真正亞信USB轉乙太網路晶片的產品,請找該產品製造商或經銷商要求相關驅動程式與技術支持.

  我瞭解   
 
content
 
ZT487E - 5V 250K 128-Fanout RS-485收發器 | 亞信電子
Asix
  
>>English
>>简体中文
最佳瀏覽效果: 建議使用 IE 8.0以上Mozilla FirefoxGoogle Chrome ,螢幕解析度設為1024x768
 
您是訪客
| 登錄 |
 
嵌入式乙太網路控制器
 Non-PCI 超高速乙太網路
 Non-PCI 高速乙太網路
 MII/RMII 高速乙太網路
超高速USB乙太網路控制器
 USB 3.0 超高速乙太網路
 USB 2.0 超高速乙太網路
 USB 2.0 高速乙太網路
嵌入式網路/USB單晶片
 嵌入式Wi-Fi單晶片
 嵌入式乙太網路單晶片
 USB KVM切換器單晶片
I/O 連接控制器
 PCIe 橋接器
 PCI 橋接器
 USB 橋接器
 RS-232/RS-485收發器
      5V RS232 收發器
      3V RS232 收發器
      5V RS485 收發器
      3V RS485 收發器
 EL驅動器
嵌入式無線模組
 嵌入式Wi-Fi模組
 嵌入式藍牙模組
首頁 >> 產品訊息 >> I/O 連接控制器 >> RS-232/RS-485收發器 >> 5V RS485 收發器 >> ZT487E

 ZT487E -- 低功耗5V 250Kbps 128-Fanout RS485收發器

The ZT487E devices are 5V differential data line transceivers for RS485/RS422 communication that consist of one driver and one receiver with high level of ESD protection. They are designed for balanced transmission lines interface that meet ANSI standard TIA/EIA-485-A and ISO 8482:1987(E) specifications.

The ZT487E devices spans out with half duplex, data rate guaranteed at 250K bit per second, and allow one-fourth of an unit load that fan out 128 devices sharing a common bus. The I/Os are enhanced-electrostatic discharge (ESD) protected, exceeding ±15kV Human Body Model (HBM).

規格:

  • Meets or exceeds the requirements of ANSI Standard TIA/EIA-485-A and ISO 8482:1987(E) specifications for Vcc at +5V ±5%
  • Low quiescent current - 0.5mA typ., 1mA max
  • Low shutdown current (where applicable) - 0.01μA typical, 10μA max
  • Guaranteed standard data rate 250Kbps
  • Thermal shutdown protection
  • -7V to +12V common-mode input voltage range
  • Half-Duplex configuration
  • Allows up to 1/4 unit load (128 devices) on the same common bus
  • Controlled driver output slew rate and receiver input filtering
  • Active-high driver enable and active-low receiver enable
  • ESD Protection on bus terminals
    • ±15kV Human Body Model (HBM)
  • Drop-in Replacements for MAX487E, SN75LBC182
  • Standard fanout driving 1 unit load (32 devices) available on the ZT487E

應用目標:
  • RS422/RS485 communications
  • Utility meters
  • Industrial process control
  • Building automation
  • Level translators
  • Transceivers for EMI-sensitive applications
  • Routers and HUBs
  • Industrial-controlled Local Area Networks
  • Industrial PCs, embedded PCs and peripherals
  • Industrial, security CATV and camera application

 接腳配置與應用示意圖

ZT487E_Pin_Configuration.jpg

 選型指南

IO_5V_RS485_Selection_Guide.jpg

技術文件

 產品簡介,產品介紹和數據表

ZT487E 產品簡介306.2 KB2015-04-30
Download
ZT487E 數據表 1.5 MBV2.102017-09-05
Login MyASIX

[使用條款]    [網站地圖]
Copyright © 2013-2017 ASIX Electronics Corporation All Rights Reserved.