ASIX Electronics Corporation Notice USB to LAN products 
Dear Customer:

If you got some problems on ASIX USB to LAN products, please download the How to identify authentic ASIX USB to LAN Products document to double check if your USB to LAN device includes an Non-authentic ASIX USB to LAN solution inside or not? If yes, please contact the manufacturer of your USB to LAN device to get proper drivers instead. ASIX DOES NOT GUARANTEE AND PROVIDE ANY SUPPORT FOR THOSE NON-AUTHENTIC ASIX PRODUCTS.

  Yes, I understand.   
USB to LAN products content USB to LAN products
Best viewed at 1024x768 with IE 8.0 or above or Mozilla Firefox or Google Chrome
ASIX About ASIX ASIX News ASIX Products Contact ASIX Join ASIX ASIX Support MyASIX ASIX Vedio  
You are guest
| Login |
Embedded Ethernet ICs
    Non-PCI Gigabit Ethernet
    Non-PCI Fast Ethernet
    MII/RMII Fast Ethernet
SuperSpeed USB-to-LAN ICs
    USB 3.0 to Gigabit Ethernet
    USB 2.0 to Gigabit Ethernet
    USB 2.0 to Fast Ethernet
EtherCAT/Industrial Ethernet ICs
Embedded Network/USB SoCs
    Embedded Wi-Fi SoC
    Embedded Ethernet SoC
    USB KVM Switch SoC
I/O Connectivity ICs
    PCIe Bridge
    PCI Bridge
    USB Bridge
   RS-232/RS-485 Transceivers
      5V RS232 Transceiver
      3V RS232 Transceiver
      5V RS485 Transceiver
      3V RS485 Transceiver
    EL Drivers
Embedded Wireless Modules
    Embedded Wi-Fi Modules
    Embedded Bluetooth Modules
Home >> Products >> I/O Connectivity ICs >> RS-232/RS-485 Transceivers >> 3V RS485 Transceiver >> ZT3070E

 ZT3070E -- Low Power 3V 250Kbps RS485 Transceivers (Features 14-pin, Full Duplex)

The ZT3070E series devices are 3V differential data line transceivers for RS485/RS422 communication that consist of one driver and one receiver with high level of ESD protection. They are designed for balanced transmission lines interface that meet ANSI standard TIA/EIA-485-A and ISO 8482:1987(E) specifications.

The ZT3070E series devices span out with half or full duplex, data rate guaranteed at 250Kbps, 500Kbps or 16Mbps, and allow 1/8 unit load that fan out 256 devices sharing a common bus. The I/Os are enhanced-electrostatic discharge (ESD) protected, exceeding ±15Kv Human Body Model (HBM).


  • Meets or exceeds the requirements of ANSI Standard TIA/EIA-485-A and ISO 8482:1987(E) specifications for Vcc at +3.3V ±10%
  • Low quiescent current – 0.5mA typ., 1.5mA max
  • Low shutdown current (where applicable) - 0.05μA typical, 10μA max
  • Guaranteed standard data rate 250Kbps, 500Kbps, or 16Mbps
  • True Fail-Safe (Open and Short) Receiver
  • -7V to +12V common-mode input voltage range
  • Half-Duplex or Full-Duplex configuration
  • Allows up to 1/8 unit load (256 devices) on the same common bus
  • Controlled driver output slew rate and receiver input filtering
  • Active-high driver enable and active-low receiver enable
  • ESD Protection on bus terminals
    • ±15kV Human Body Model (HBM)
  • Drop-in Replacements for MAX3070E, MAX3071E, MAX3072E, MAX3073E, MAX3075E, MAX3076E, MAX3077E, MAX3078E
Target Applications:
  • RS-422/RS-485 communications
  • Utility meters
  • Industrial process control
  • Building automation
  • Level translators
  • Transceivers for EMI-sensitive applications
  • Routers and HUBs
  • Industrial-controlled Local Area Networks
  • Industrial PCs, embedded PCs and peripherals
  • Industrial, security CATV and camera applications

 Pin Configuration and Application Diagram


 Selection Guide


Technical Documentation

 Product Brief, Product Introduction and Datasheet

ZT3070E Brief305.5 KB2015-04-30
ZT3070E Datasheet 1.9 MB2015-05-05

[Privacy Policy]    [Terms of Use]    [Sitemap]
Copyright © 2018 ASIX Electronics Corporation All Rights Reserved.