 |
|
|
|
|
|
|
| AX11005 -- Single Chip Microcontroller with TCP/IP and 10/100M Fast Ethernet MAC/PHY (Features 512K Flash, 16GPIOs, LQFP-80) | |
The AX11005, Single Chip Microcontroller with TCP/IP and 10/100M Fast Ethernet MAC/PHY, is a System-on-Chip (SoC) solution which offers a high performance embedded micro controller and rich communication peripherals for wide varieties of application which need access to the LAN or Internet. With built-in network protocol stack, the AX11005 provides very cost effective networking solution to enable simple, easy and low cost Internet connection capability for many applications such as consumer electronics, networked home appliances, industrial equipments, security systems, remote data collection equipments, remote control, remote monitoring and remote management. In addition to stand-alone application, the AX11005, with popular TCP/IP protocol suite on-chip and built-in I²C bus or SPI bus, can be used as network co-processor to offload TCP/IP protocol processing loading from system CPU in an embedded system
|
Feature: - MCU
- 8-bit pipelined RISC, single cycle per instruction with maximum operating frequency of 100MHz (100 MIPS)
- 100% software compatible with standard 8051/80390
- 2 GPIO ports of 8 bits each
- 2 external interrupt sources with 2 priority levels
- Supports power management unit, programmable watchdog timer and 3 16-bit timer/counters
- Debug port for connecting to In-Circuit Emulation (ICE) adaptor
- 5 channels of Programmable Counter Array (PCA)
- On-chip Program and Data Memory
- Embeds 512KB Flash memory without bank select and 16KB SRAM for program code mirroring
- Supports initial Flash memory programming via UART or ICE adaptor, the so-called In System Programming (ISP)
- Supports reprogrammable boot code and In Application Programming (IAP) to update run-time firmware or boot code through Ethernet or UART (US Patent Approval)
- Embeds 32KB SRAM for data memory
- Buffer Management
- Embeds DMA engine and memory arbiter. Support 3 DMA channels for high performance data movement needed for network protocol stack processing
- On-chip 10/100M Fast Ethernet MAC and PHY
- Integrates IEEE 802.3 10BASE-T/100BASE-TX compatible Fast Ethernet MAC and PHY with dedicated 12KB SRAM for Ethernet packet buffering. Support full-duplex and half-duplex operations
- Supports twisted pair crossover detection and auto-correction (Auto-MDIX)
- Supports wakeup via Link-up, Magic packet, Wakeup frame or external input pin
- TCP/IP
- Build in TCP/IP accelerator in hardware to improve network transfer throughput. Support IP/TCP/UDP/ICMP/IGMP checksum and ARP in hardware
- Supports TCP, UDP, ICMP, IPv4, DHCP, BOOTP, ARP, DNS, SMTP, SNTP, uPNP, PPPoE and HTTP in software
- Communication Interface
- 3 UART interface (with 1 supporting 921.6Kbps and Modem control)
- I²C interface (master and slave mode)
- SPI/Micro wire interface (3 masters or 1 slave mode)
- 1-Wire controller interface (master mode)
- 10/100 Ethernet PHY interface
- Supports network boot over Ethernet using BOOTP and TFTP
- Integrates on-chip 3.3V to 1.8V voltage regulator and require single power supply of 3.3V only
- Integrates on-chip oscillator and PLL. Require only one 25MHz crystal to operate
- Integrates on-chip power-on reset circuit
- 80-pin LQFP RoHS package
- Operating
temperature: 0°C to 70°C or -40°C to 85°C
|
| Target Applications: | - Weather Station
- POS
- Time Attendance System
- Network Thermometer
- Hardware TCP/IP Offload Engine
- Consumer Electronics
- Audio over Internet, Internet Radio
- VoIP ATA phone
- Inventory Management
- Vending System
- Hotel Mini bar
- Interface Product
- RS232/422/485 to Ethernet Adapter
- CAN to Ethernet Adapter
- Ethernet to ZigBee Bridge
- Building / Home Automation
| - HVAC control
- Networked Home Appliance
- Security System
- Biometric access control
- Fingerprint reader
- Network Camera/Remote Surveillance
- Professional DVR (for remote control e.g. Camera tilting and panning)
- Fire and safety
- Industrial Control
- Remote Data Collection Equipment/ Remote Monitor
- Remote Control and Management
- Environment Monitoring or Network Sensor
- Automatic Meter Reading
- Networked UPS
- Lighting control
|
|
|
Block Diagram |
|  |
|
Selection Guide |
|  |
| AX1100x 80-pin Development Board | | |
 |
Available |
| | This is a general-purpose development board for AX11001/AX11005 |
|
Technical Documentation | |
Product Brief, Product Introduction and Datasheet |
| | AX11005 Product Brief | | 146.1 KB | | 2011-01-10 | |
|
FAQs |
click here for more AX11005 FAQs....
|
| | Q0001: | What is the AX110xx product family? | | A0001: | The AX110xx family of products consist of AX11001, AX11005, AX11015 and AX11025. Please refer to the AX110xx Product Introduction document (http://www.asix.com.tw/products.php?op=ProductList&PLine=72) for details of AX110xx family products. | | Q0002: | How do I purchase the AX110xx development kit? | | A0002: | ASIX provides three kinds of AX110xx development kits.The AX1100x 80-pin Development Kit, AX11015 128-pin Development Kit and the AX11025 128-pin Development Kit. If you need the local bus interface, external memory bus or external MII interface, you will need to purchase the AX11015 128-pin Development Kit. If you need the CAN interface, you will need to purchase the AX11025 128-pin Development Kit. Please contact ASIX's Sales (sales@asix.com.tw) for more details. |
|
|
|
|
